Decoupage

Podge

Podge is the core of the Dala decoupage system. It is this high viscosity glaze that ultimately determines the quality of the décopeurs work. Podging involves the process of applying and sanding multiple layers into a smooth satin finish.

How to use: Apply multiple layers, allow each layer to dry, sand with fine sandpaper and water between each set of 10 layers.

Podge can also be regarded as a glue and sealer in one.  Podge can be used to bond serviettes to wood, tiles, tin, brick, stone, wax candles, soap etc.  You do not need to sand the layers back.  Follow these stimple steps:

• Cut out your design from your choice of serviette.
• Separate the two white layers of the serviette from the top design.  You only need the top layer of the serviette with the design, but make sure to remove the two white layers.
• Paint a smooth layer of Podge onto the surface.  Not too thick but it needs to be wet to touch.
• Place the serviette cutout face up on the wet Podge.
• Apply another layer of Podge on top of the serviette working from the centre out removing any bumps and air pockets with brush stokes.  Always go one way with your brush strokes as going back and forth will lift your serviette.  Make sure to cover the edges.  It may appear slightly "antiqued" or have creases this is normal.
• Paint a second layer if you wish.  For a more textured effect wait for your first layer to dry and with the second layer apply it with your fingers leaving raised areas, when this is dry it will have a textured look.   

Deco Varnish Dead Flat

Dala Deco varnish is a pure acrylic, water based varnish that provides a non-yellowing matt finish to all decoupage projects. New acrylic resin technology has enabled us to manufacture a water-based, entry-level varnish that outperforms all of its predecessors. Our Deco Varnish now has an advanced anti-blocking formulation, ensuring that craft projects don’t remain sticky long after they have been varnished.

How to use: Apply with a soft brush and allow to dry.  Sold in a 250ml Screw Top Jar.

Deco Varnish High Gloss

Dala Deco varnish is a pure acrylic, water based varnish that provides a non-yellowing high-gloss finish to all decoupage projects. New acrylic resin technology has enabled us to manufacture a water-based, entry-level varnish that outperforms all of its predecessors. Our Deco Varnish now has an advanced anti-blocking formulation, ensuring that craft projects don’t remain sticky long after they have been varnished.

How to use: Apply with a soft brush and allow to dry.  Sold in a 250ml Screw Top Jar.

Varnish Heat Resistant

The Heat Resistant Deco Varnish, with it’s state of the art water based technology, allows the user to complete robust functional projects without switching to toxic solvent based varnishes. This varnish also now has an advanced anti-blocking formulation, ensuring that craft projects don’t remain sticky long after they have been varnished. This varnish has fast proven to be a firm favourite with crafters. It is the obvious choice to complete a craft project that will be subjected to extreme heat, for example trays, placemats and coasters.  Sold in a 250ml Screw Top Jar.

How to use: Apply with a soft brush and allow to dry.

Crazy Cracks

Dala's crackle for decoupage and other projects using craft paint.

How to use: Apply a layer of Dala Craft Paint and allow to dry.  Cover this with a layer of Crazy Cracks and allow to dry.  Apply another layer of Dala Craft Paint and watch it crack.  Finish by using a Dala Deco Varnish.  Sold in a 250ml Flip Top Bottle.

Please note:Metallic craft paint should only be used for the base coat.  Dala Oil Paint may be used to highlight the cracks.For exciting results use contrasting or complementary colours.  Clean brushes warm water and soap. Observe good housekeeping practices and keep this product out of reach of small children.

Large Crack Base

Crackle Glaze

Dala's antiquing crackle for decoupage

How to use: Apply a liberal layer to a dry layer of Large of Small Crack Base Coat and allow to dry. Highlight with a Dala oil paint or anqitue rub and varnish with a solvent-based varnish.  Sold in a 250ml Screw Top Jar.

Transfer Glaze

Dala Transfer Glaze is a highly adhesive and elastic glaze that has been specifically designed to turn paper images into thin flexible plastic transfers. This allows the crafter to work neatly and efficiently on severely curved surfaces. It is also used as the base coat to Dala Crackling.

How to use: Apply a coat to the printed surface and allow to dry thoroughly. Allow more than one coat for larger transfers. Soak the print face down in water for 20 minutes. Gently rub away the paper, leaving the print on the transfer.